Forum Home
Press F1
Thread ID: 15039	2002-01-26 22:48:00	'...finished installing new devices' Which One?	Guest (0)	Press F1

Post ID	Timestamp	Content	User
33016	2002-01-26 22:48:00	I frequently Ghost back over my drive and upon the first reboot I get the '....finished installing new devices, reboot'. How do I tell which device is being restalled? Why does it only do it after a Ghost Image has been put back? Does not do it on normal cold boot. OS = W2K Original Ghost = Disk to Image and contains all devices in working order. Ghosting back = Disk image to disk. Checking Device manager after the Ghost but before the requested reboot shows all devices okay in Device Manager. None of the other devices require a restart after this operation. Anyone have some ideas what might be causing this? Its a bit annoying as it requires an extra operation after Ghosting. If I don't do the reboot it comes up eavery time until I do it. It also seems that I have to a cold reboot to stop it. Thanks Sergio	Guest (0)
33017	2002-01-26 23:33:00	Im curious, why are you frequently restoring your Ghosted Hard Drive?	Guest (0)
33018	2002-01-26 23:45:00	Had you installed any new hardware sice the point that you made the Ghost image. Because it could be a new device that has been installed since then. If it really bugging you, you could always create another Ghost image after the new device has been installed. JM	Guest (0)
33019	2002-01-27 19:33:00	Ian: I do a lot of Beta testing and need a clean image to work from, hence the regular Ghosting. JM: No new devices installed between Ghosts. I suspect its being caused by devices attached to USB's, possible a Memory Stick reader, tried 3 different readers and all do the same. Remove reader and goes away/!?!? Sergio	Guest (0)
1