| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 125953 | 2012-07-29 07:13:00 | Help with PSU | Driftwood (5551) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1291391 | 2012-07-29 07:13:00 | I am looking for a power supply for a Biostar iDeq 120v. Current dead one is: Enhance Model: ENP-222E |
Driftwood (5551) | ||
| 1291392 | 2012-07-29 11:46:00 | I can only assume you are in the USA being 120v. You would be just as well off using Google as we are 240v. | mikebartnz (21) | ||
| 1291393 | 2012-07-29 19:45:00 | Corsair, Antec or Enermax. | pctek (84) | ||
| 1291394 | 2012-07-29 20:33:00 | Current one is Enhance but any make that will fit & do the job. This is deffinately for NZ use. |
Driftwood (5551) | ||
| 1291395 | 2012-07-29 20:59:00 | This has a 20 pin motherboard conector. The size is the problem 140mm x 82mm x 56mm. |
Driftwood (5551) | ||
| 1291396 | 2012-07-29 22:14:00 | would a SFF PSU fit? www.pp.co.nz 125mm x 100mm x 64mm I used one of these in a mini itx build to run an i5 and a GTX 460, worked well. |
dugimodo (138) | ||
| 1291397 | 2012-07-29 22:49:00 | a 120v power supply will just explode if you plug it in to standard NZ mains. How are you powering this? | inphinity (7274) | ||
| 1291398 | 2012-07-29 22:54:00 | would a SFF PSU fit? www.pp.co.nz 125mm x 100mm x 64mm I used one of these in a mini itx build to run an i5 and a GTX 460, worked well. Yes it would do the job, but I doubt the owner would like to spend that much on a 10 year old system |
Driftwood (5551) | ||
| 1291399 | 2012-07-29 22:58:00 | a 120v power supply will just explode if you plug it in to standard NZ mains. How are you powering this? That 120v is just a figure I got from google when I looked up Biostar iDeq. I assumed it was just a model number. The current PSU is a dual voltage one. |
Driftwood (5551) | ||
| 1291400 | 2012-08-12 23:53:00 | Good result on this. The owner found a complete unit at a re-cycle centre. Just swaped over the PSU's. |
Driftwood (5551) | ||
| 1 2 | |||||