| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 18052 | 2002-04-16 19:12:00 | M758LMR motherboard | Guest (0) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 44187 | 2002-04-16 19:12:00 | Trying to install a new video card in one of the pci slots. When it starts booting up,I get a series of beeps and no display on moniter at all. I have it set to pci as primary video display. Changed that to AGP which is what the on-board is, and it booted up fine detected pci card and installed it. Went back into bios to change it back to pci as primary and got the same results. Wouldn't come up and got a series of beeps.And just to make sure installed new video card into another pc with no problems. Can't find problem. Thanks in advance. |
Guest (0) | ||
| 44188 | 2002-04-16 21:36:00 | You may find that you can only add a PCI video card as a second adaptor - quote from manual: 'The default PCI setting still lets the onboard display work and allows the use of a second display card installed in a PCI slot' | Guest (0) | ||
| 44189 | 2005-02-02 06:47:00 | I was just wondering if you ever got this problem solved. I have a similar problem, but my computer won't even make it past the POST with a GeForce2 MX 400 in ANY open PCI slot. No video at all. Pete |
Drognan (409) | ||
| 1 | |||||