| Post ID |
Timestamp |
Content |
User |
| 46419 |
2002-04-29 23:24:00 |
I have a epox ep-6vba mother board with a 533 pIII processor. I was looking at my board last night and saw that the settings on the dip switch were different to what the motherboard manual says. the setting was fo a 400mhz processor running at 100 or 266 at 66. I have changed it to what the setting should be, will this make any difference? will my computer spontaneously combust? any feedback is appreciated |
Guest (0) |
| 46420 |
2002-04-29 23:39:00 |
are you sure your current setting isn't 4x with a 133fsb ? |
Guest (0) |
| 46421 |
2002-04-30 00:50:00 |
yeah my current setting was 4x 400 with 133, does this make up a 533? im new at this and my ignorance shows it. I also wanna know if I can over clock it? |
Guest (0) |
| 1 |
|