Forum Home
Press F1
Thread ID: 18861	2002-05-04 01:02:00	CanoScan N640P	Guest (0)	Press F1

Post ID	Timestamp	Content	User
47010	2002-05-04 01:02:00	Hi There It was just recently that I got a new assembled PC with Duron 950 CPU & WinXP HEd OS. 1 When I try to go to internet, the screen sticks with the horu glass for around 2 minutes & then only the WIndow comes up to allow me to put the passworld etc. 2 I have a parallel port CanoScan N640P which was working very well with my old 'slow' PC. When I installed it in the new PC, the system comes up with an Error Code- OX10ff0800. I then went to the Canon site & downloaded the softare, something called TAIWAN under the given model no. That also doesn't work. Could anyone please tell me what the problem is? Regards Mukesh	Guest (0)
47011	2002-05-04 01:54:00	For the scanner, all the models ending in P have to be used on an EPP port. You change this in your BIOS under integrated peripherals if that isn't there you'll probably need to dig deeper and find it yourself. Usually the settings could be ECP, EPP, SPP, bi-directional, ECP/EPP. You can try ECP/EPP to see if that will work for you otherwise you'll have to choose EPP.	Guest (0)
47012	2002-05-04 02:39:00	Thanks Kame for this fast reply. I'll try as advised. Thanks Mate Mukesh	Guest (0)
47013	2002-05-04 02:58:00	For your internet problem try going to Dial Up Networking, right click on your ISP, choose Properties|Server Types and untick the Log On to Network box if it has a tick in it.	Guest (0)
47014	2002-05-05 06:07:00	Thanks Susan. I'll try as you said. Cheers mukesh	Guest (0)
1