| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 126532 | 2012-09-03 03:45:00 | Change Linksys Wireless Router Settings via WiFi | ManUFan (7602) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1298535 | 2012-09-03 03:45:00 | Hi all We have a linksys WiFi router which we use for accessing the internet from our iPads at work. Now I have installed CloudOn on one iPad but can't get it to connect through the router. Apparently I need to open up some ports TCP433, UPD3478-3479 & 9000-9999. My problem is that when trying to access the router configuration via WiFi (192.168.1.1) I don't get a connection (page unreachable). Does anyone know how to access the router via WiFi or do I have to physically connect via an Ethernet port - then navigate to the router configuration page? Cheers!! in advance |
ManUFan (7602) | ||
| 1298536 | 2012-09-03 03:51:00 | Since, this is at work, are there any firewalls somewhere?? | Speedy Gonzales (78) | ||
| 1298537 | 2012-09-03 04:01:00 | Doubt that there is in our office. Linksys basically sits on a port from our cisco (I think) switch. Had to register the linksys on our domain to get it to connect to the internet originally. Short answer - dunno! Could be! Could the linksys itself be blocking access?? Perhaps I could try without having the linksys connected to our network..... |
ManUFan (7602) | ||
| 1298538 | 2012-09-03 04:14:00 | The linksys SHOULD have been setup to deny admin(settings) access via wifi. you'll need to try & access it via LAN cable |
1101 (13337) | ||
| 1298539 | 2012-09-03 04:23:00 | The linksys SHOULD have been setup to deny admin(settings) access via wifi. you'll need to try & access it via LAN cable Ok - that's probably it. Thanks will give it a go |
ManUFan (7602) | ||
| 1 | |||||