| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 20363 | 2002-06-03 22:50:00 | Printer Problem - KX-P6500 | Guest (0) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 52293 | 2002-06-03 22:50:00 | Hi I got some problem with my Panasonic KX-P6500 Personal Laser Printer. It prints OK for the first few pages nice and clean, but the printouts get 'dirty' after that. I have to switch it off for a while then switch it back on again to get a clean printout. Any one knows where I can get this fix at a reasonable price? I rang up MEC and they want to charge me $49.00 to diagnos and takes 4 - 5 days just to diagnos! Recommendations, please. Cheers bk |
Guest (0) | ||
| 52294 | 2002-06-03 23:59:00 | try this solution...take out the toner cartridge give it a bit shake ..this is to just evenly spread the toner ink inside the cartridge....and u havent mention clearly if the printed side or underneath that is dirty....then it could be the rollers that is dirty....clean the rollers with a cleaning solution...take out the toner first if ur gonna clean it. I hope this helps. Jim Q. |
Guest (0) | ||
| 52295 | 2002-06-04 00:45:00 | Since you said that it needs to be left off for a while, it could be that the printer is overheating. Check that none of the ventilation ports on the sides, back and bottom are covered with anything, and that they have a fair bit of room for air to flow. Just a thought. |
Guest (0) | ||
| 52296 | 2002-06-04 11:48:00 | Thanks for all the tips Cheers bk |
Guest (0) | ||
| 1 | |||||