| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 21362 | 2002-06-24 01:17:00 | Accessing P C Company case | Muzza (600) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 56840 | 2002-06-24 01:17:00 | Can anyone describe how to get into a PC Company case...without using a tin opener! It is probably very simple but......... The PC is 12 months old ie the one with the inaccessible Floppy drive |
Muzza (600) | ||
| 56841 | 2002-06-24 01:34:00 | Hi Muzza,found that you pull the plastic front off,just clipped on.Then you can see the screws holding the sides on.Undo those, then the side slides forward and off. Guess it's similar to mine which is 18 months old.Try anyhow. | Neil McC (178) | ||
| 56842 | 2002-06-24 04:03:00 | Yep, Two clips either side, and two on the top (none on the bottom). Clips are metal, and do not break easily, so either pull the bottom out, or push a bread and butter knife down the side and gently lever off. Mobo is usually attatched to RHS, so undo LHS panel for access (two screws). G P |
Graham Petrie (449) | ||
| 1 | |||||