Forum Home
Press F1
Thread ID: 21923	2002-07-07 10:01:00	AVG Registration Code Required	Mike-Y (908)	Press F1

Post ID	Timestamp	Content	User
60539	2002-07-07 10:01:00	I've registered three times at the Grisoft site but haven't received a reg code via email. Tried a code which someone posted here: "6-XREE-522613-AVG" but no luck. If someone has another code I could use I would be very grateful - thanks :-)	Mike-Y (908)
60540	2002-07-07 10:04:00	> I've registered three times at the Grisoft site but > haven't received a reg code via email. Tried a code > which someone posted here: "6-XREE-522613-AVG" but > no luck. If someone has another code I could use I > would be very grateful - thanks :-) Try it with a F after the X and before the REE (eg "XFREE") perhaps? Also it is caps-sensitive, so try doing it with Capslock on, and then Capslock off, and see if that makes a difference. Mike.	Mike (15)
60541	2002-07-07 10:23:00	Thanks Mike - the missing letter did the trick :D	Mike-Y (908)
60542	2002-07-07 10:25:00	> Thanks Mike - the missing letter did the trick :D Glad to help - the bill's in the mail... I think all up after about 3 seconds of thinking, and about 20 hours of fake billing, the total is around $2400+GST (at $120 an hour). :D LOL Mike.	Mike (15)
60543	2002-07-07 10:34:00	Don't forget the labor charges for having to type out your message.	Sam H (525)
60544	2002-07-07 10:35:00	> Don't forget the labor charges for having to type out > your message. that was allowed for in the 3 seconds thinking time :) Mike.	Mike (15)
60545	2002-07-07 11:00:00	plus the all important where and tear of the equipment :p	-=JM=- (16)
60546	2002-07-07 11:12:00	Also don't forget power consumption costs.	Sam H (525)
60547	2002-07-08 22:30:00	After a format and clean install, I found that the AVG prog on the June pcw would not update the virus files. Connected to the site ok - d/l - but would not install. Only way to fix was to d/l from their site the main prog. Now all up to date again. Bye	Peter H (220)
1