| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 23334 | 2002-08-13 22:10:00 | Unload Debugger | Gremlin (1485) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 70821 | 2002-08-13 22:10:00 | I have read the earlier post about this but I hope to not have to reload XP to clear it. My experience is that any Safedisc protected game will not run and brings up the "Unload debugger" message. As stated in the other post, I too have another PC running the same set up which has no problem. Now with Duke Nukem MP I get the debugger message before I even load the software. My thoughts are that I have installed a piece of software and when removed it has left an entry that SD2 looks for. I know it is not Daemon Tools as this is installed on my other machine and it is not the internet explorer settings. I feel it must be the registry as it still happens when I have used Enditall to quit all other programs. If anyone else has this problem I would be interested to know of any progs they may have installed that might cause this. |
Gremlin (1485) | ||
| 70822 | 2002-08-13 23:00:00 | The consensus of opinion on Google is that it can be caused by another application that is running. Try shutting down everything you can? Also some suggestion that BIOS can cause it. |
godfather (25) | ||
| 70823 | 2002-08-13 23:43:00 | I do shut down all running programs so only XP default pros running. I doubt it is the bios as it used to be fine, it has only happened recently and I have changed all my hardware except the hard drive. | Gremlin (1485) | ||
| 70824 | 2002-08-14 00:06:00 | There was one site that claimed it happened after a BIOS upgrade... What happens in Safe Mode? (probably wont run due to driver support but what error?) |
godfather (25) | ||
| 70825 | 2002-08-14 00:34:00 | I'll try that tonite. Thanks for helping. | Gremlin (1485) | ||
| 1 | |||||