| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 23811 | 2002-08-26 08:46:00 | ram not registering | goofy (1636) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 74007 | 2002-08-26 09:57:00 | So the motherboard must be one of those that has both types of sockets, and my understanding is they can use the 168 pin OR the 72 pin, but not both at the same time. This would also tie up with what you have learnt by experience? |
godfather (25) | ||
| 74008 | 2002-08-26 10:47:00 | if you have the motherboard manual it most likely has the make and model number on it. what is the make and model number of the motherboard? if all esle fails look on the motherboard for model number. does the manual say it can take 128meg of registered ram? also some have a jumber to run edo or sdram. |
tweak'e (174) | ||
| 74009 | 2007-02-21 02:50:00 | HI, 586MMX V 5 . 2A motherboard (MB in future) should accept up to 384Mb of combined SIMM and DIMM memory . Suggest you use only SDRAM (3 . 3V), there is a voltage jumper at JP2 if not set to 3 . 3V it may not be reading the SDRAM, EDO DRAM takes 5V . The skimpy MB book does not say how high you can go with SDRAM, at present I'm running 64MB on this "old" system . With 2 SDRAM slots I'm wondering if anyone is running this MB over 256MB of memory . Hope this helps . |
Kanuck (1637) | ||
| 74010 | 2007-02-21 03:26:00 | HI, 586MMX V 5 . 2A motherboard (MB in future) should accept up to 384Mb of combined SIMM and DIMM memory . Suggest you use only SDRAM (3 . 3V), there is a voltage jumper at JP2 if not set to 3 . 3V it may not be reading the SDRAM, EDO DRAM takes 5V . The skimpy MB book does not say how high you can go with SDRAM, at present I'm running 64MB on this "old" system . With 2 SDRAM slots I'm wondering if anyone is running this MB over 256MB of memory . Hope this helps . PS check the following site, deals with MB, pics etc . . motherboards . org/files/manuals/89/M537v52 . pdf" target="_blank">www . motherboards . org |
Kanuck (1637) | ||
| 1 2 | |||||