Forum Home
Press F1
Thread ID: 25040	2002-09-24 12:06:00	Dualing Monitors	N4CA (2014)	Press F1

Post ID	Timestamp	Content	User
82744	2002-09-24 12:06:00	SPECS: Win XP PRO 128MB RAM PII 525MHZ (O/C) ----------------------------------- Iam having a probelm with dualing my 2 monitors. I have a SIS 530/620 8MB onboard graphics & a S3 Virge DX/GX 4MB PCI Card. I cant get my onboard graphics to work, under device manager it has error code 10"This device cannot start". Could anyone help me solve this. BTW I dont have a AGP slot.	N4CA (2014)
82745	2002-09-24 12:19:00	That suggests your drivers are not XP compatable at a guess. Doesnt look like there are XP drivers for the chipset, there are Win 2000 ones ?? Look on Google for sites.	godfather (25)
82746	2002-09-24 22:55:00	Will the onboard graphics work when you don't have the other graphics card installed? Because you've got a graphics card inserted, the BIOS may automatically turn off the onboard graphics (I think this is what usually happens). You could try turning it on in the BIOS. But more likely the onboard graphics doesn't support multi screen setups - to set up multiple displays you must have 2 video cards that both support multiple displays, and some older onboard (I think even some newer ones) don't. Mike.	Mike (15)
82747	2002-09-25 04:43:00	You can likely pick up an old PCI on for about $20 from Trade-me, SIS are good, and Trio also, They're popular. Look online to see if it's multi-monitor compatible before you bid or buy or whatever! Fromthen on, Just insert the PCI card and that should be it!!! Chilling_Silence	Chilling_Silence (9)
82748	2002-09-25 05:18:00	And if all else fails, and you need cheering up, try listening to Duelling Banjos (www.sillyhumor.com). ;-)	Graham L (2)
82749	2002-09-25 08:21:00	If it's PCI then it should be multi-screen capable. They just don't make on-board video as good as it could be :( Mike.	Mike (15)
1