| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 128338 | 2012-12-13 08:20:00 | Graphics query | Driftwood (5551) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1318072 | 2012-12-13 08:20:00 | Is it normal to have 2 entries for a Radeon 9600Pro showing in device manger. | Driftwood (5551) | ||
| 1318073 | 2012-12-13 08:29:00 | Not normal but doesnt matter | Slankydudl (16687) | ||
| 1318074 | 2012-12-13 10:00:00 | Seen that if the board has onboard and a graphic card. | wainuitech (129) | ||
| 1318075 | 2012-12-13 10:21:00 | On all or just some? I only have one entry. | Slankydudl (16687) | ||
| 1318076 | 2012-12-13 20:48:00 | The mobo is Asus P5VDC-MX & does have onboard graphics. These are not used but I can't see anywhere to disable them in the bios. The two entries are both for the addin Radeon 9600. It's probably always been like that, just spotted it last night while checking out a lockup problem. Seems to be running ok again now. |
Driftwood (5551) | ||
| 1318077 | 2012-12-13 21:34:00 | From what i remember of when my gpu was doa you dont turn it on/off via bios but by something else such as device manager. | Slankydudl (16687) | ||
| 1318078 | 2012-12-13 21:50:00 | Yes, with ATI it is normal. Mine says: PCI bus 4, device 0, function 0 PCI bus 3, device 0, function 0 It is an HD5970. Dual card you see.... |
pctek (84) | ||
| 1318079 | 2012-12-14 01:05:00 | Thank you. | Driftwood (5551) | ||
| 1318080 | 2012-12-20 20:39:00 | Thought I would pull on this thread again. As mentioned in post #5 this system is recently getting occasional lockups. Mouse freezes & no keyboard response. Reboot gets it going again, but sometimes it will lockup again strait away. OS is Win XP Pro SP3 Event viewer shows a DCom error Has been scanned with MSSE, Mbam, Spybot & Superantispyware. Also run CCleaner. Was wondering if this may be heat related as local temps are going up atm. Also a Tenda W322P Wireless Adapter was recently added & is the only internet access. Since resetting all bios settings to default, it hasn't locked up again yet. |
Driftwood (5551) | ||
| 1318081 | 2012-12-20 22:34:00 | Event viewer shows a DCom error Since resetting all bios settings to default, it hasn't locked up again yet. Event Viewer doesn't always show the current problem. So you fixed it then - something it didn't like in the BIOS then..... |
pctek (84) | ||
| 1 2 | |||||