| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 27787 | 2002-12-02 23:55:00 | CD Rom install on 486 | Greg (193) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 102875 | 2002-12-03 04:06:00 | Your W95 boot floppy ought to have the software required to read the CD. Check your BIOS setup, and see if the CD is being reciognised by the hardware. I am guessing ... the HD and CD are on the same 40 wire cable, connected to a card which also has the floppy, and serial and printer port interfaces? |
Graham L (2) | ||
| 102876 | 2002-12-03 08:35:00 | You're right it did :) Tried this first off (boot disk) and couldn't work out why it wouldn't work - was coming up with PCI read failure. Guess it was third time lucky. Thanks to all of you for your posts Cheers Greg |
Greg (193) | ||
| 1 2 | |||||