| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 27828 | 2002-12-03 22:20:00 | NTKERN.VXD Missing? | Chilling_Silence (9) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 103099 | 2002-12-03 22:20:00 | When installing Win98 on a PC, the USB Root Hub comes up (In the system Properties/Device manager) saying "The NTKERN.VXD device loader(s) for this device could not lead the device driver (Code 2)" What can I do to get it to work? Cheers Chilling_Sielnce |
Chilling_Silence (9) | ||
| 103100 | 2002-12-03 22:49:00 | This problem was even more common with Win95 plus USB. Have a look at this MS Knowledge Base (things are harder to find now as they are changing the article numbers). support.microsoft.com |
Terry Porritt (14) | ||
| 103101 | 2002-12-03 23:00:00 | Wow - the MS site doesnt work well in Phoenix so for the first time in weeks I hadto load up IE6, it was scary.. ;) I followed the steps, and even did NTKERN.VXD too after a reboot to find nothing new... But still it says that same message? Any other suggestions? Thanks |
Chilling_Silence (9) | ||
| 103102 | 2002-12-04 00:44:00 | Well... the only things I can think of if you are running Win98SE, is to extract ntkern.vxd from the Win CD and put it into both c:\windows\system and c:\windows\system\vmm32. Else, disable USB in the BIOS, remove USB hub from device manager, re-boot, make sure everything else is going OK, then try re-enabling USB in BIOS re-boot, and see what happens. | Terry Porritt (14) | ||
| 103103 | 2002-12-04 00:45:00 | Okay, cheers, I'll give that a shot! Thanks for all your help :D |
Chilling_Silence (9) | ||
| 1 | |||||