Forum Home
Press F1
 
Thread ID: 29717 2003-01-30 20:23:00 Installing second hard drive alancorner (725) Press F1
Post ID Timestamp Content User
117356 2003-01-30 20:23:00 Running Win XP on a 80Gb drive if I installed another 40gb drive with XP on it how do I go about configuring the system so that I can use either drive as necessary. alancorner (725)
117357 2003-01-30 20:43:00 Open up your computer. Stick it in, give it power, attach the data cable, ensure that you have the dip switch set to slave (if its on the same cable as your other hd)

Close your computer, see if the BIOS picks it up at startup.
If it doesn't go into the BIOS and do an "auto detect"
save settings and exit

Load up windows.
Partion the new hard drive. Format the Hard drive. then your away. Refer to the FAQ section for more detailed information.
roofus (483)
117358 2003-01-30 20:45:00 Ummm... did u just say, turn your PC on before connecting hard drive???

Lo.
Lohsing (219)
117359 2003-01-30 21:01:00 > Ummm... did u just say, turn your PC on before connecting hard drive???

I had to read that twice too. :D

Nah, roofus means connect a plug and cable from the power supply to the hard drive -- LONG before the PC is switched on. ;-)
Susan B (19)
117360 2003-01-30 21:13:00 Whew!! I thought it was my eyes playing a trick on me... ;)

Lo.
Lohsing (219)
117361 2003-01-30 22:27:00 Yea thats what i meant. Thanks susan roofus (483)
117362 2003-01-30 23:45:00 Inidentally you don't need to have XP installed on both drives - just the first one. Greg S (201)
117363 2003-01-31 21:35:00 Thank you. alancorner (725)
117364 2003-01-31 21:39:00 When you've installed the drive, and are in XP, Right click on My Computer and select Disk management.

You should be able to right click on the drive and select Format :-)

Cheers


Chilling_Silence
Chilling_Silence (9)
1