| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 30035 | 2003-02-09 03:52:00 | USB OUTLETS | Poppa John (284) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 119506 | 2003-02-09 03:52:00 | Is it possible to put a "Double Adaptor" into one of the USB sockets at the back of the Tower Tin Box? Like using a doble adaptor on a "Mains" power point? I need more, preferably on the front. Thanks Poppa John | Poppa John (284) | ||
| 119507 | 2003-02-09 03:56:00 | not that i know of. the best way is to use a usb hub. advailable in powered and non-powered versions. | tweak'e (174) | ||
| 119508 | 2003-02-09 03:57:00 | i think what you are looking for is a USB hub. check at dick-smiths and expect to pay $60 |
robsonde (120) | ||
| 119509 | 2003-02-09 04:11:00 | I see in todays paper that BigByte have USB hubs for $35 | Millsie (3111) | ||
| 119510 | 2003-02-09 05:31:00 | Check this link. It is for a USB 2.0 PCI Card with 2 Rear & 3 Front Panel USB Ports. www.globaljunxion.com It might be what you are looking for. Andrew |
Andrew B (867) | ||
| 119511 | 2003-02-09 06:30:00 | The link in my reply doesn't appear to work. Try going to http://www.globaljunxion.co.nz/ and searching for DH-U20PC23N That should work. Andrew |
Andrew B (867) | ||
| 119512 | 2003-02-09 06:52:00 | You can use a USB hub ( better the powered ones) or if you are thinking of buying more USB devices in the future like printers and scanners that will run on USB 2.0 then it may pay to get a PCI / USB2 card at this point. | Elephant (599) | ||
| 1 | |||||