| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 30144 | 2003-02-11 19:28:00 | Linux and ADSL | JoGiles (1898) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 120337 | 2003-02-11 19:28:00 | Hey everyone, I've just signed up for Jetstream Starter through IHUG. I have a server running e-smith SME Server, when setting up adsl connections, am I correct in selecting PPPoE as my connection type? If not, could someone please let me know what I should choose - there are only about 4 options, and if necessary I will list the rest. Thanks a lot, Jonathan Giles |
JoGiles (1898) | ||
| 120338 | 2003-02-11 19:33:00 | Taken from Telecom's website: ADSL modem setup information for use with Telecom ADSL 1) Operating Mode set to G.992.1, G.DMT or ANSI T1.413 iss 2 but not G.Lite or G.992.2 2) VPI/VCI set to 0/100 3) Protocol set to PPP over ATM (PPPoA) (RFC 2364) with VC-multiplexed encapsulation 4) Username and password set according to the user ID that the customer has on the service they are trying to connect to (either ISP or corporate). The user name must be set to the user ID followed by an @ symbol followed by the domain name eg user@isp.co.nz Number 3 should answer your question. Cheers |
CYaBro (73) | ||
| 1 | |||||