| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 129771 | 2013-03-12 08:37:00 | Dodgy Internet. | Nick G (16709) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1332335 | 2013-03-12 08:37:00 | So got the new router/modem installed. Noticed a definite improvement in internet reliability, but am still having issues, including computers being able to access it, but mobile devices not, and then the occasional temporary dropout (which fixes itself), and the reasonably infrequent total dropouts, which require a router + modem reset. Where to go from here? | Nick G (16709) | ||
| 1332336 | 2013-03-12 08:41:00 | What's the make / model router? | Chilling_Silence (9) | ||
| 1332337 | 2013-03-12 19:18:00 | What's the make / model router? The Draytek/TP Link combo you recommended on your blog :) - still running stock firmware, not gargoyle. |
Nick G (16709) | ||
| 1332338 | 2013-03-12 20:44:00 | ^^ is your problem then :p Not a fan of the stock firmware. | Chilling_Silence (9) | ||
| 1332339 | 2013-03-12 22:21:00 | And when you flash it make sure you use the latests 1.5.9 firmware, the earlier stuff (below 1.5..7) causes a brick on the later versions of the 1043, I found out the fun way :D | The Error Guy (14052) | ||
| 1332340 | 2013-03-12 23:14:00 | ^^ is your problem then :p Not a fan of the stock firmware. So the firmware could be causing the connection issues? |
Nick G (16709) | ||
| 1332341 | 2013-03-12 23:23:00 | Absolutely! Just make sure to read the guide thoroughly though. As mentioned the 1.10 hardware revision has issues with older firmwares... |
Chilling_Silence (9) | ||
| 1332342 | 2013-03-12 23:52:00 | Absolutely! Just make sure to read the guide thoroughly though. As mentioned the 1.10 hardware revision has issues with older firmwares... Right, will pass this info on and see whether it gets done ;) |
Nick G (16709) | ||
| 1332343 | 2013-03-29 21:29:00 | So, I've downloaded the firmware,and have plugged my laptop into the ethernet. When I try to upgrade the firmware though, it says 'please chose a file to upgrade'. What am I doing wrong? | Nick G (16709) | ||
| 1332344 | 2013-03-29 21:31:00 | Unzip / add the firmware update you downloaded. So it can update it | Speedy Gonzales (78) | ||
| 1 2 | |||||