| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 34243 | 2003-06-08 02:37:00 | Rebuilding a Computer | awoof (1092) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 150801 | 2003-06-10 05:36:00 | i thought 64mbwould have been enough too. It has 2 slots which one should it be in. In the slot closest to the power pack the progrees bar on the Bios Revisision goes about a fifth of the way then frezzes. The slot nearer the cpu opens the same except the progress bar between Optiplex G1 450L+ and underneath is Bios Revisision AO9,goes about a third of the way, then the logo flickers, then starts all over again then just keeps repeating itself. Press F2=setup flashes in the top right hand corner also.When you press F2 it nothing happens. Perhaps the orginal 64 mb ram is faulty. It was in anther compter that was having reboot problems Alan |
awoof (1092) | ||
| 150802 | 2003-06-10 05:41:00 | There might be "Bank 0", "Bank 1" or similar markings; otherwise the documentation might be needed. There are a number of tests which are done before the POST looks at memory. It's a bit suspicious ... I'd pick that the "good" stick is in the first bank posin. | Graham L (2) | ||
| 1 2 | |||||