| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 34769 | 2003-06-23 10:28:00 | Unscrewing Screwed Screws | Caesius (3758) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 154517 | 2003-06-24 02:30:00 | Is it the head or the thread thats stripped? If its the head & theres enough room, you can cut a slot across the head with a hacksaw blade and use a flathead screw driver to unscrew it. |
bmason (508) | ||
| 154518 | 2003-06-24 12:23:00 | If you have to undo a tight Philips screw, put a little valve grinding paste on the screwdriver tip, this will prevent it from slipping. I have had screws break before the screw driver slipping by this method. You can buy a special paste for this from some hardware stores. |
Mzee (158) | ||
| 1 2 | |||||