| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 34917 | 2003-06-28 01:43:00 | My USB card won't work | Johnny R (1017) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 155752 | 2003-07-01 21:35:00 | Did you install the camera software then reboot with the camera plugged in, allowing 98 to detect and install camera software. In my experience with usb devices, you install the device( in this case your camera) software then reboot allowing 98 to autodetect and then install the necessary drivers which it will find. Also check the camera manual for software installation instructions. Hope this helps good luck. |
beama (111) | ||
| 155753 | 2003-07-02 05:48:00 | Yup, done that several times. Removed the card and replaced it also. Seems to be a reasonably common problem looking at other inquiries on this site. Can i work it using a parallel connection? JR |
Johnny R (1017) | ||
| 1 2 | |||||