Forum Home
Press F1
 
Thread ID: 35222 2003-07-05 11:39:00 windows setup NO GO jferg (3232) Press F1
Post ID Timestamp Content User
157732 2003-07-05 11:39:00 Trying to install win operating system on new system
Have tried win XP pro and Win 2000. Both boot OK from disk then starts the windows setup. Starts installing files then it says.."Starting Windows" and hangs.

System has new hard drive unformated and unpartitioned

Now What?

MB gigabyte 7vkmpp
256 ram
Maxtor 40 Gig
Aopen writer
jferg (3232)
157733 2003-07-05 11:54:00 > System has new hard drive unformated and
> unpartitioned

Might be a "good idea" to initialise and format the HDD first perhaps......
godfather (25)
157734 2003-07-06 08:17:00 Have partitioned and formated....Tried to also install win 98 SE today. All went well until it said "parparing to install windows" then it HUNG...AGAIN.

NOW WHAT
jferg (3232)
157735 2003-07-06 08:18:00 It's not the OPsystem..must be the MOBO or CPU? jferg (3232)
157736 2003-07-06 08:21:00 is the antvirus optoin in the bios off ??

check your hardware.
tweak'e (174)
157737 2003-07-06 09:12:00 Yes , antivirus option is off and Hardware all seems fine.
It's new Maxtor, new Ram, writer is working, new MOBO. Have tried it using onboard vid and then also with Graphics card
jferg (3232)
157738 2003-07-06 09:25:00 During windows setup:

First it says...........Setup is loading files
This stage goes fine
then the next message is ........Setup is starting Windows
This is when it hangs, the light on the writer goes out at the same time
jferg (3232)
157739 2003-07-06 11:11:00 Check your RAM, if you have installed new sticks alongside some old ones, pull it or them out and install with just your old ones. Put the new ones back in if the setup is successful afterwards. sinndisco (4059)
157740 2003-07-07 07:23:00 Had this happen 3x to me
Once bung Matrox G200 Vid Card
Once bung Ram
Once bung CD Rom
Stumped Badly (348)
1