Forum Home
Press F1
Thread ID: 35512	2003-07-15 00:31:00	PC Died	maximus (4233)	Press F1

Post ID	Timestamp	Content	User
159775	2003-07-15 00:31:00	HP8316 out of warrenty was going fine then shut down and transported to Hamilton and back now on startup only the fan goes. (no beeps etc) Its in pretty bad condition dust wise where can I get a replacement power supply HP Pavilion 8316 Base processor 350 MHz Intel Pentium (R) II microprocessor Chipset Intel 440BX Memory Standard: 48 MB (SDRAM) Maximum: 384 MB Speed: 100 MHz/10 ns SDRAM only Sockets: 3 - 168 pin Size: 16, 32, 64, or 128 MB DIMMs Type Supported: Intel 1.0 compliant Basically not alot of info on the site, or is there a cheap place to drop in and get repaired	maximus (4233)
159776	2003-07-15 00:42:00	As for cheap repair places, might me nice if you hint where you are? Just know you have been to Hamilton and back :)	Pheonix (280)
159777	2003-07-15 00:44:00	i would check you have all the plugs in the right place and also check no cards/cables have come loose inside the pc. seeing as the fan goes it sounds like the psu is working. i take it you are not getting any pics, is the monitor trying to turn on?	tweak'e (174)
159778	2003-07-15 00:48:00	Back in Auckland Went over cables etc, however the fans (PSU and auxiliary) only get powered up. There is no drive power or even cd rom power (doesn't open). I tried an alternative CPU as well still no go Its a PII 350, will go over it again and check connections, its pretty bad condition as was acting as a server in a black dusty place	maximus (4233)
159779	2003-07-15 02:08:00	Try to get hold of another PSU (might be easier to borrow from some1) and see if that is at fault cause the CDROM should work because its only relying on the PSU for operatablity (if thats a work :D). If there is black stuff on the connecitons try scraping it off and see if the CDrom works/opens again. Cheers Patryn	Patryn999 (3748)
1