| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 36872 | 2003-08-22 09:09:00 | CDROOOM... where are you... | hamstar (4) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 169609 | 2003-08-22 09:09:00 | I'm fixing a friends computer and I fixed everything else but one thing leads to another and bam, the CD drive stops working. It a 233MHz p-MMX with 32MB Ram the CDROM is a Daimond data 24x. BIOS is ROM PCI/ISA BIOS (P5tx-B19) Award Software In BIOS All drives are set to Auto except Primary Master(HDD). PNP/PCI PCI IDE IRG Map To: PCI-AUTO Primary IDE INT#: A Secondary IDE INT#: C PNP OS Installed: No Resources Controlled by: Auto Reset Configuration Data: Disabled On boot it says in the Diag screen CDROM- Model 4 so I changed this to: IDE Secondary Master: Model 4 The CDROM is master on IDE #2 and was set to D when it worked. Now I have bigger problems. Whenever the CD drive is plugged in to IDE the screen says, no signal. ?:| Also the PCI bridge and HDD controller have problems. Is this a faulty Mobo. My tutor says that this i likely. Any ideas? Cheers |
hamstar (4) | ||
| 169610 | 2003-08-23 05:56:00 | Has no one had this problem, or heard of it or know what to do. No ideas?:O | hamstar (4) | ||
| 1 | |||||