| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 37681 | 2003-09-15 06:18:00 | PC doesn't respond after going in to standby mode | chiefnz (545) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 175363 | 2003-09-15 06:18:00 | Hi all, just a few queries about standby mode. At present my computer doesn't come back on after it has gone into standby mode, as a result I have to hit the reset button and reboot again. Kinda defeats the purpose I would think? Works perfectly fine in Hiberbation mode, so I don't get it. Do I have to change any settings in the BIOS to make the Power Management features work properly or is there a patch I can download for Windows 2000 ( I have previously read there is a patch available but not sure where to get it) System specs: Motherboard: ASUS P4SDR-VM CPU: CELERON 1.7Ghz RAM: 512MB OS: WINDOWS 2000 Pro SP4 |
chiefnz (545) | ||
| 175364 | 2003-09-15 06:44:00 | Hi chief. Go to Control Panel > Key Board > Hardware tab > Properties button > Power Management tab and see if the check box Allow this device to bring the computer out of stadby is checked. There is a similar setting for your mouse. Cheers Murray P |
Murray P (44) | ||
| 1 | |||||