| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 38894 | 2003-10-21 07:27:00 | VHS transfer | pavlr (3220) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 185426 | 2003-10-21 07:27:00 | I am attempting to transfer old VHS tape to computer. My problem is on viewing the captured tape on computer there is a big, white, horizontal line that takes up about 2/3 of the programs display. Viewing the image as it is recording is fine. It is only when I am playing back. This happens in both Winfast PVR and Ulead Video Studio 6 SE so I am guessing it might have something to do with the codec..although I have changed the output options in each program. My computer specs are amd xp2700+, Leadtek Winfast A250 ultra (TI 4600) VIVO, 1 gb ram and sufficient hard drive space. I am using my graphics cards video input using the correct leads that were supplied with the card. I have changed all the settings in each program but have had no luck. I have had it working before months ago and the transfer worked fine then. Any ideas? Regards. |
pavlr (3220) | ||
| 185427 | 2003-12-22 08:17:00 | make shure that you have set your settings to capture at pal not ntsc | ilikelinux (1418) | ||
| 1 | |||||