| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 40093 | 2003-11-27 08:42:00 | screen printing on cases" gamertec" | SanSingh (4824) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 195249 | 2003-11-27 08:42:00 | I need to print " gamertec" on the front of a black case. Can any one suggest a company that doing this kind of work. I happy to take sound advice how I can DIY | SanSingh (4824) | ||
| 195250 | 2003-11-27 20:00:00 | What if you printed the word "gamertec" in big font, on a large A4 sheet of normal inkjet stickers (available at every good stationary store), then used a craft knife to cut the letters out on the INSIDES only. Then stick the "template" you've created (big sticker with holes where the letters were), onto the front of the case, and spray over the gaps with spraypaint (colour of your choice). Then remove the sticker before the paint dries, and there you go - quick and easy paint job. | somebody (208) | ||
| 195251 | 2003-11-27 20:02:00 | I don't know if they exist, but if you can, get the stickers which take up an entire A4 sheet uncut. Otherwise a sheet of A4 paper with the letters cut out of it, glued to the front of your case with a water-soluble glue, and do the same thing. |
somebody (208) | ||
| 195252 | 2003-11-28 04:42:00 | Not screen printing, but any signwriters will do it. Get the text needed, draw it as a line drawing and save as an eps. Take it to the signwriters, you will get a vinyl cut. Sticky letters to put on the case, and can be in a range of colours. Don,t worry easy to apply, has application film Places in Wellington: TAG signs, Oxford St, off Adelade road, and a place in rudby st by the basin but i forget the name. Hope this helps |
superOman (745) | ||
| 195253 | 2003-11-28 05:31:00 | Yes, a cut vinyl sign is the way to go. Anything involving masking and spraycans would be so messy and disappointing that it's a waste of time and money. (In fact, the sign might cost less than a spraycan and any masking material). Before making up the artwork, talk to the people who is doing it ... they might be able to do it exactly as you want it, with a better choice of fonts, while you wait. |
Graham L (2) | ||
| 195254 | 2003-11-29 08:13:00 | Thank you superOman, I will call TAG Sign. | SanSingh (4824) | ||
| 195255 | 2003-11-29 08:18:00 | Graham, Vinyl will be good . Is this a permanent solution, in due case I will need to do 30+ at a time. I have seen some cases have name printed on it. How do these guys do it. | SanSingh (4824) | ||
| 195256 | 2003-11-29 08:31:00 | This is now making sense to me regarding earlier posts about the PC Company case. I now think that possibly you want to go into business making computers fitted inside ex PC Company cases and want to brand these with the "Gamertec" brand. I can be wrong of course. |
Elephant (599) | ||
| 195257 | 2003-11-29 08:52:00 | You might be better off using a small sticker using your logo and Gamertec on it when we are possibly talking about 30+ cases at a time. | Elephant (599) | ||
| 195258 | 2003-11-29 09:09:00 | A sticker or vinyl cut will work, remember, with a vinyl cut you will get to see the case, so no haze or a wrong coloured background as might happen with a sticker, Glad I was of help |
superOman (745) | ||
| 1 2 | |||||