| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 40306 | 2003-12-04 07:10:00 | Network drives | carpark (4948) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 197202 | 2003-12-04 07:10:00 | I'm running XP prof. on a home network with mapped drives. Things were working OK, but now my network drives do not connect on startup (little red x on the drive). Open the drives up with explore and all's OK, anybody know of the setting required to auto connect at startup. I could not find anything in past messages. Cheers |
carpark (4948) | ||
| 197203 | 2003-12-04 08:12:00 | Im not to sure about XP, but when you map the drive, tick the box reconnect at logon, this might require you to remove the mapped drives. | MrBeef (342) | ||
| 197204 | 2003-12-04 10:55:00 | Just guessing here, try right clicking on the red x marked mapped network drives and see what options you have, (gets down on knees and prays that the option connect may appear). good luck |
beama (111) | ||
| 197205 | 2003-12-04 13:08:00 | It may pay to remove all the network drives, and re-map them again. Same thing was happening for me and this solved it. YMMV Cheers Chill. |
Chilling_Silently (228) | ||
| 1 | |||||