Forum Home
Press F1
Thread ID: 41241	2004-01-04 08:49:00	USB connection - Sony Dig Cam software	z832z5762 (5076)	Press F1

Post ID	Timestamp	Content	User
205257	2004-01-04 08:49:00	USB software / cable prob! I have a late model Toshiba TE2300 laptop and loaded Sony Cybershot 5.0 MB dig cam software onto my laptop, however I had already connected the camera USB cable - I should have loaded the USB software first - now it won't recognise the Sony Cybershot camera when I connect it to download photos. Anyway to make my laptop recognise the connection? Thanks, Mike	z832z5762 (5076)
205258	2004-01-04 09:06:00	Note: running Win 2000 Pro.	z832z5762 (5076)
205259	2004-01-04 09:11:00	yes you do. I have a sony dig cam & the software / drivers have to be loaded before conecting the cable.	Stick (204)
205260	2004-01-04 10:14:00	you may have to unistall the cam software and reinstall, remember software then hardware	beama (111)
205261	2004-01-04 13:11:00	aahh, maybe i have made the same mistake... but im not sure what to unistall, can anybody tell me what i should look for? because i plugged in my panasonic dig cam b4 i installed the software and now my pc wont detect it...... =(	Mr_T (5031)
205262	2004-01-04 13:34:00	aahh, maybe i have made the same mistake... but im not sure what to unistall, can anybody tell me what i should look for? because i plugged in my panasonic dig cam b4 i installed the software and now my pc wont detect it...... =(	Mr_T (5031)
205263	2004-01-04 19:18:00	I'd suggest unplugging the camera, and reinstalling the software over the top of what you've already installed, restart the computer, and then plug in your camera. It should come up with the bubble in the taskbar which says "new hardware found", where it should go and automatically set it up for you. I have a similar camera (3.2megapixels instead), which works fine if you install the software first.	somebody (208)
1