| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 41364 | 2004-01-08 20:52:00 | USB 2.0 Embedded Card Reader | tonyclark (4466) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 206120 | 2004-01-21 08:49:00 | If I try a card in the card reader after it has disconnected, I can not see it on My Computer. In fact there are no card reader drives to be seen in My Computer,unless I reboot and then they are back until it disconnects the next time. They usually show as 4 separate drives, one drive for each of the card slots on the reader. The only other thing that is live I have plugged in the USB is my printer. That is in the plug at the rear of the mobo. I also have a hub with power supply, but these only have pocket PC and camera cables plugged in, but the devices are not usually connected. The pins on the mobo are down the side. there are two lots of two rows down the side of the board. |
tonyclark (4466) | ||
| 1 2 | |||||