Forum Home
Press F1
 
Thread ID: 44176 2004-04-10 07:22:00 No sound when recording with TV2000 XP card vk_dre (195) Press F1
Post ID Timestamp Content User
228374 2004-04-10 07:22:00 hi all,
well i just bought a tv tuner card and i have set it up and its running but when i try to record any videos or tv shows through it i only get video in the end file and no sound, have i setup sumthing wrong?

Thanking you in advance,
v.K
vk_dre (195)
228375 2004-04-10 07:49:00 make shure that you have selected linein for recording (i'm guessing tthat there is a cord going fromt he tuner to the line in)

then try. You willl need to open up volume control, then go file, properties and switch the view to recording.

ILL
ilikelinux (1418)
228376 2004-04-11 05:31:00 Thanks for the reply, i have selected Line in for recordin, but i dont have a cord going from the tuner to the line in, is that cord meant to be internal or external as i have setup the internal cord that is attached from the tv tuner to the motherboard but i dont have an external one.

Thanks for your reply,
v.K
vk_dre (195)
228377 2004-04-11 05:37:00 it there a line out on the tv card? ilikelinux (1418)
228378 2004-04-12 11:10:00 OK, there is a line out from the TV capture card, it needs to go into your line in to your sound card. Make sure under the 'capture settings' that this is the case too. It's all in the manual Curious George (3535)
228379 2004-04-12 11:35:00 If the TV card has only an internal connector to your sound card you will just have to select the right input channel on the volume control for your sound card/hardware.

If you can hear the sound from the tv card in general then will you definately be able to record/capture that - check recording settings, volume control and the "record" channel in the program you are using to record/capture.
HadO (796)
1