| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 135645 | 2013-11-27 06:51:00 | Terrestrial decoder | arjay (1202) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1360971 | 2013-11-27 06:51:00 | Is it possible to use a terrestrial decoder to record onto a Panasonic analogue hard drive recorder, seeing that the aerial is shared? I am trying this but just get a grey monochrome picture. I know it can be done with a Satellite decoder but that uses a different input. Thanks, Arjay |
arjay (1202) | ||
| 1360972 | 2013-11-27 07:25:00 | Probably not, because FV is digital the recorder isnt. If the decoder has a USB port / supports recording to USB, buy a USB flash drive | Speedy Gonzales (78) | ||
| 1360973 | 2013-11-27 08:22:00 | You should be able to output the composite audio and video of the decoder to the inputs of the DVD recorder. Bit piggy to manage though.. I tried this before I bought my TiVo but never again.. | paulw (1826) | ||
| 1360974 | 2013-11-27 09:25:00 | If you have component (red/green/blue RCA connectors (marked as Y/Pb/Pr, or similar)), or S-video outputs from your set-top box (which you should have if it's not a budget one), and the same (inputs) on your recorder, the results will be greatly improved than using RF:yuck: (aerial) or composite:yuck::yuck: You'll also need to run a audio feed (either analogue or digital). |
feersumendjinn (64) | ||
| 1 | |||||