Forum Home
Press F1
 
Thread ID: 51442 2004-11-21 03:28:00 Another question from a worried mind. JJJJJ (528) Press F1
Post ID Timestamp Content User
294470 2004-11-21 03:28:00 I've been noseing around inside my box and have found another possable problem.
How are the front USB connections attached to the motherboard? Are they a simple baynet connector or do I have to get in there with a screwdriver?
Jack
JJJJJ (528)
294471 2004-11-21 03:39:00 They're just connected to the pins on the mobo. (2 rows, 5+4 pins).

Pull them off, (upwards), and they come off. The connection on the front of the case, would be screwed in.
Spacemannz (808)
294472 2004-11-21 03:47:00 Another worry gone. Thanks.
Jack
JJJJJ (528)
294473 2004-11-21 03:49:00 If theyre going/working, why worry about them?? Spacemannz (808)
294474 2004-11-21 03:50:00 Neccesity is the mother of all invention... I'd say curiousity is the next ;-) Chilling_Silence (9)
294475 2004-11-21 04:16:00 he's changing his mobo theotherone (1421)
294476 2004-11-21 04:24:00 Ah that explains it. Just hope he puts them in the right way Spacemannz (808)
294477 2004-11-21 07:08:00 Is there a wrong way?? I'll bet I'll find it if there is.
Jack
JJJJJ (528)
294478 2004-11-21 07:15:00 Yup there is a wrong way. If you put the wires the wrong way round, the USB port wont work most probably.

Read the manual on which wires go where, from the front of the case / the mobo.

The wires on the cable should match up with whats in the manual with the USB header.

Your wires on your case, might be labelled different to what the wires on the front of my case say.
Spacemannz (808)
1