Forum Home
Press F1
 
Thread ID: 51795 2004-11-30 01:12:00 PC resets when resuming from hibernate george12 (7) Press F1
Post ID Timestamp Content User
298073 2004-11-30 01:12:00 Hi,

Hibernate has served me well for every Windows install I have had. But this problem started when (after hibernating) I removed my hard drive to take to a friends house because I needed to burn some CDs and my CD-RW was broken (and I was out of stock of new ones :().

Anyway, it was a flop as I STUPIDLY forgot that Windows 98 couldn't read NTFS.

But when I took my hard drive back and connected it, it gets to the end of the bar (resuming), and click - resets cold. It does this every time I hibernate now. But why?

My friend's PC can't have altered the hard drive - Windows couldn't even see it.

I can only start up normally now, and hibernate is useful to me, especially for things I don't want to close, but need to turn off my PC.

Cheers George
george12 (7)
298074 2004-11-30 01:18:00 I have seen your thread about Linux.

Solution: Trash Windows and use Linux only.

All I can suggest is trying system restore, or to reinstall windows.
Your friends comp might still have written to the HDD to try and read it. I know it sounds silly, but its true.

Also... How big is the HDD? If it is bigger than 137GB your friends computer might have stuffed it up due to the 24bit LBA problem
fus1_n (3818)
298075 2004-11-30 02:25:00 Fus1-,

Is probably wright there is a serious possibility something was written to the boot sector, do you have an mbr copy or an image to extract one from.

D.
drb1 (4492)
298076 2004-11-30 02:51:00 As far as I can see, it can't be an MBR problem - the machine is booting. Try repeatedly hitting F8 as the bar turns up and starts loading, and then select 'delete hibernation data and boot normally' (something like this, it's been a while since I last tried to do this). Also a note for the future - never mix HDD swapping and hibernation. I did this a while back, and it wiped the filesystem address tables on the HDD - I had to format it (luckily this was a non-os slave).

Good luck,
Bletch
Bletch (244)
298077 2004-11-30 02:54:00 Sorry, didn't read the whole post. Try booting up normally, disabling hibernation, then rebooting into safe mode. While in safe mode, delete 'hiberfil.sys' from your HDD. Then reboot again back into normal mode. Enable hibernation again, and reboot for the final time. Then try to hibernate it - I think it will work after this.

Bletch
Bletch (244)
298078 2004-11-30 02:54:00 This is my feeling, too. If you are removing a drive, it's certainly a good idea to make sure that the OS has been shut down. ;-) Graham L (2)
298079 2004-11-30 03:46:00 > As far as I can see, it can't be an MBR problem - the machine is booting. Try repeatedly hitting F8 as the bar turns up and starts loading, and then select 'delete hibernation data and boot normally' (something like this, it's been a while since I last tried to do this). Also a note for the future - never mix HDD swapping and hibernation. I did this a while back, and it wiped the filesystem address tables on the HDD - I had to format it (luckily this was a non-os slave).

That's right, it does boot. Also, the suggestion of yours is the only way I can get into the OS. Problem is, the problem just reoccurs.

> Try booting up normally, disabling hibernation, then rebooting into safe mode. While in safe mode, delete 'hiberfil.sys' from your HDD. Then reboot again back into normal mode. Enable hibernation again, and reboot for the final time. Then try to hibernate it - I think it will work after this.

Trying now, thanks

> Use linux only

Linux is good on a server, but I'm not shifting from Windows for workstations.

George
george12 (7)
298080 2004-11-30 03:47:00 > This is my feeling, too. If you are removing a drive, it's certainly a good idea to make sure that the OS has been shut down.

I know this from a horrible, horrible, experience with Growly where I lost 9GB of data by not shutting down, but hibernating. I just forgot this time :(.

Cheers George
george12 (7)
298081 2004-11-30 04:07:00 >I lost 9GB of data by not shutting down, but hibernating

How much Ram do you have in that thing, I thought when you hibernate it writes only what is in the Ram to disk
Rob99 (151)
298082 2004-11-30 04:30:00 > I thought when you hibernate it writes only what is in the Ram
> to disk


It does. The 9GB was other stuff he had on the drive.

Bletch
Bletch (244)
1 2