Forum Home
Press F1
 
Thread ID: 51869 2004-12-02 00:55:00 A choice of 2 old cpu´s........ rmcb (164) Press F1
Post ID Timestamp Content User
298928 2004-12-02 00:55:00 Making an old machine for the kids, got a choice of a Cyrix m2 or an AMD k6-2. Both 225 mhz.
Which one is best?
Cheers
rmcb (164)
298929 2004-12-02 01:06:00 i would go for the amd , as i dont know / havnt used the other brand noone (22)
298930 2004-12-02 01:09:00 And if u only have 1 mobo would both cpus fit in it anyway??

Unless u have 2 mobos. I had a cyrix, dunno if it was m2 or whatever, but it was hopeless! Cyrix arent the best of cpus to use.
Spacemannz (808)
298931 2004-12-02 01:10:00 AMD, ad the Cyric is sometimes not dected as a 225MHz CPU by windows, therefore Windows will not let you install some software. fus1_n (3818)
298932 2004-12-02 01:30:00 Also add my opinion to the AMD.
However 225MHz has me puzzled. I thought the slowest K6-2 was 300 MHz, though the K6 went down to 166MHz, and the Cyrix 686 MII came in equivalent PR ratings like PR266 with an actual speed of 233MHz.

The K6-2 can also have an FSB of 100MHz, whereas the Cyrix was odd with bus speeds of 66MHz, 75MHz 83Mhz and 100Mhz depending on the motherboard capabilities.
Terry Porritt (14)
298933 2004-12-02 01:54:00 I had a K6-2 for many years before I handed it on to my brother for his Email etc.
The speed is about 500mhz and it runs Windows XP just fine with 256meg memory and a 80gig drive. I may have upgraded the Bios, but I can't remember.

I have found it to be very reliable.
Mzee (158)
298934 2004-12-02 06:26:00 Cyrix m2 (which was named m2 300 even thogh it ran at around 233) use socket 370 amd k6 225 (should be k6 233) use socket 7 so it depends on the mobo you have. If you have the choice of cpu and boards go with the amd k6. The cyrix m2 is gutless and the amd will stomp its guts out in anything requiring some muscle. the highlander (245)
298935 2004-12-02 23:20:00 AMD it is then, thanks. rmcb (164)
1