| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 52311 | 2004-12-16 08:23:00 | Linux & modem | Prescott (11) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 303975 | 2004-12-23 07:06:00 | As far as I know, all external modems are full hardware modems that should just work with Linux with no additional drivers (this has been my experience to date). Not sure why it would connect at 9600bps unless it is faulty?? | johnd (85) | ||
| 303976 | 2004-12-23 10:38:00 | Which program are you using to connect (KPPP, wvdial etc)? Does /etc/ppp/ppp.conf exist on your system? | Caesius (3758) | ||
| 303977 | 2004-12-24 00:15:00 | KPPP | Prescott (11) | ||
| 303978 | 2004-12-24 00:55:00 | An external modem shouldn't be giving PCI information. :D Scanmodem is looking at the internal winmodem. :rolleyes: Remove the internal modem. You might be able to disable it in the BIOS, but I'd remove it physically (unless it's part of the motherboard :eek: ). Then the startup routines should find the external modem on the serial port. (unless it's a USB modem, which might be opening another can of worms.) Use dmesg | less to see what has been seen at boot time. |
Graham L (2) | ||
| 1 2 | |||||