Forum Home
Press F1
Thread ID: 52445	2004-12-19 08:57:00	Ethernet port on computer	tedheath (537)	Press F1

Post ID	Timestamp	Content	User
305589	2004-12-19 20:45:00	All the knoweledge you have, all the help you could give, and this is your contribution. What a waste of space. D. Whoaa, easy - I'd say that's a pretty valid contribution. Isn't that exactly what the original post requested??	Spartacus (3313)
305590	2004-12-19 20:57:00	Oh c'mon people.... Its win98.... Its piss-easy to configure. I did NT4.0 just yesterday with the same router. If you've assigned a static IP address, then point the gateway to 10.1.1.1 (If you're using USB, then the Gateway/Primary DNS should be 10.1.1.2). Just use DHCP and it'll be fine. I would be inclined to set 10.1.1.1 as your primary DNS server regardless, and let the router to DNS Forwarding from there. Provided you have TCP/IP for "your lan adapter" then you'll be sweet. You dont _need_ IPX/SPX or anything else for this. Make sure you connect to your routers web-interface and configure it correctly: http://10.1.1.1 Cheers Chill.	Chilling_Silence (9)
305591	2004-12-20 07:33:00	Whoaa, easy - I'd say that's a pretty valid contribution. Isn't that exactly what the original post requested?? Ninja W-T-F what ever it calls its self today, is cabable of giving ted step buy step instructions to completly solve his problem, in its sleep. Its post wasnt aimed at ted. D.	drb1 (4492)
305592	2004-12-20 08:29:00	Thank you everyone for replies and help. Sorry I couldnt check threads before but I have been out doing hydraulic breakdowns. It looks a bit bewildering but I have printed out posts and if it is quiet tomorrowI will have a go configuring lan. Chill you really are a cool moderator your english is striaght to the point and understandable. Thanks again everyone who helped I will let you know how I got on. (Dont hold your breath though retards like me shouldnt play around with computers) tedheath	tedheath (537)
305593	2004-12-20 08:34:00	Thank you everyone for replies and help. Sorry I couldnt check threads before but I have been out doing hydraulic breakdowns. == === tedheath What evil, cooking oil beastie's broke this time? D.	drb1 (4492)
305594	2004-12-20 08:43:00	Ted, There is a lot of good advise here but it maybe a little hard to find amongst the egos. Did the modem come with an installation guide? If it did there should be two sets of instructions with it. One for auto set up and the other for manual set up. If you have no guide ring up your isp, it is their job to get you online. I agree with a lot of stuff written here, however I am not by any means an expert and am prepared to get shot down as soon as I post this.:dogeye:	theother1 (3573)
305595	2004-12-20 08:48:00	Ninja W-T-F what ever it calls its self today, is cabable of giving ted step buy step instructions to completly solve his problem, in its sleep. Its post wasnt aimed at ted. D. That sand seems to be irritating you some doesn't it. I changed my username once, and not by choice. If I had my way I'd have maintained my original username - it's not like I'm trying to hide behind it. I state who I am. Don't like it then tough. The post I made was aimed at correcting your misinformation which I spotted whilst trawling the thread. It was relevant to the threads overall content, and it was accurate. Whilst I could've written instructions for configuring W98 without firing a neuron I was otherwise tied up and didn't have time.	ninja (1671)
305596	2004-12-20 09:37:00	That sand seems to be irritating you some doesn't it. I changed my username once, and not by choice. If I had my way I'd have maintained my original username - it's not like I'm trying to hide behind it. I state who I am. Don't like it then tough. The post I made was aimed at correcting your misinformation which I spotted whilst trawling the thread. It was relevant to the threads overall content, and it was accurate. Whilst I could've written instructions for configuring W98 without firing a neuron I was otherwise tied up and didn't have time. If you were so short of time simply correct/post different and move on. But you, no you have to snipe as well, its in your nature I suppose, like some children enjoy hurting small animals. Hence your correction defence is flawed. I knew it was wrong but didnt go back and correct it. Ted would be more concerned to know that 30 ft was not an issue. anybody who wanted to run over 30M would Know its 90 somethig M around 300ft american standard, which is what my post was ment to say. Try and paint your self a halo today, your nature will not allow you to keep it intact. I'll watch closely at full Moon. D.	drb1 (4492)
305597	2004-12-20 10:16:00	If you were so short of time simply correct/post different and move on. But you, no you have to snipe as well, its in your nature I suppose, like some children enjoy hurting small animals. There was no snipe, nothing personal at all. You elected to take it personally - I merely made a correction - here's the post again just in case you didn't read it last time (and the edit function is only open for 15 mins so it's the same post that was there last night): Umm nope - Cat5 is certified to 100m or so before complications arise. Hence your correction defence is flawed.No it's not, it's accurate. See above. Ted would be more concerned to know that 30 ft was not an issue. anybody who wanted to run over 30M would Know its 90 somethig M around 300ft american standard, which is what my post was ment to say. Not necessarily, I certainly didn't the first time I ran 300M of Cat5 and broke it in the middle with a hub to make the difference. I had to search, that search could have found an incorrect post :eek: I'll watch closely at full Moon.Yeah, you'll find the tides affect the sand quite markedly.	ninja (1671)
305598	2004-12-20 11:14:00	Yeah, you'll find the tides affect the sand quite markedly.[/QUOTE] Case proven. AS stated buy others your Ego. The compulsion to have the last word, and finish with something unplesant. Nothing has changed but the everchanging name, This one you definatly are not worthy off. D.	drb1 (4492)
1 2 3