Forum Home
Press F1
 
Thread ID: 53335 2005-01-14 12:20:00 2mbit REAL slow Fatjoz (6366) Press F1
Post ID Timestamp Content User
314031 2005-02-11 04:41:00 ok the problems back.

I discovered now that it is FULLY something to do with the Internal Dynalink adsl modem i have. Model ALH181. I've rung dynalink couple times and he suggested fresh install windows check settings all that.

This is a fresh install of windows on a new hard drive even and VPI: 0 VCI: 100.

I'm still having the same problem though. Takes longer than usual to connect and it picks up the line speed but just goes ****ing slow. Like Under 64k. [NOT CAPPED]. I've tested the line even with my 3com router which gets fine speeds.

Anyone :S :S
Fatjoz (6366)
314032 2005-02-11 05:24:00 are you sure you have the latest drivers? Prescott (11)
314033 2005-02-11 05:27:00 Your bandwidth won't come close to challenging the USB or ethernet capabilities. Ethernet is usually less troublesome if you have issues (as is external vs internal PCI).

Get hold of Dynalink again and ask them to walk you through a factory reset of the modem, if such a thing can be done on that model, at the least reset all the user input settings. Is there a firmware upgrade available for it? Look for something on your PC hogging your throughput. Have you done a speed test on the net?
Murray P (44)
314034 2005-02-11 05:43:00 Yea. I downloaded them from the dyanlink website direct. ALH181 ADSL Internal PCI
www.dynalink.co.nz

Speed test will give a result of below 64k no doubt. Took about 3-4 minutes to load PF1 main and a couple refreshes at that.

Someone said I should put the DNS servers in.... Anyone able to tell me what they are for 2mbit xtra jetstream? Can't really browse sites easily atm :S

Like I said it's fully fresh install of windows so theres no previous settings :S Not sure if theres a firmware update. All I did was go to dynalink as I said above and dload the latest driver. It used to work on a GA7VA motherboard but now on my new Gigabyte 7VT600P-RZ it just wont work. Fresh install even!!!
Fatjoz (6366)
314035 2005-02-11 07:16:00 DNS servers for Xtra are:
Primary: 202.27.184.3
Secondary: 202.27.184.5
Antmannz (6583)
314036 2005-02-11 07:20:00 Are the routers settings on Auto or Detect?

Try specifying them:
Authentication mode: PAP
Encapsulation: VC MUX
VPI: 0
VCI: 100
Antmannz (6583)
314037 2005-02-11 09:34:00 Yea err I gave up on the internal. Chucked the 3com in. Dynalink can go die for all i care. taking that modem back. Fatjoz (6366)
314038 2005-02-12 02:22:00 Ring Telecom Jetstream to get it sorted: 123. Xtra are just the ISP and the limiting happens with Telecoms services. E|im (87)
314039 2005-02-12 02:24:00 Na dude it's not about being limited.

It's about the actual internal modem giving errors heaps of times when trying to connect and even when it does connect, running at like 2/3kbps. I'm not capped, I know that.
Fatjoz (6366)
1 2