| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 53909 | 2005-01-31 00:20:00 | whereto find 2.5mm mono audio plug | david_evaroa (7051) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 319552 | 2005-01-31 00:20:00 | The original plug has broken, the diameter of the screw on plastic cover can be no more than 7.5mm. For use with a Kenwood 2metre hand held transciever TR-2500. I have tried Connector Systems, RS Components, Dick Smiths without luck. If anyone can point me towards a supplier that they know of or a forum that may deal with this type of equipment I would really appreciate the help, Cheers all. |
david_evaroa (7051) | ||
| 319553 | 2005-01-31 00:35:00 | Try these .Have you tried the manufacturer? www.surplustronics.co.nz telesound.co.nz www.globalpc.co.nz www.acquire.co.nz hth |
johnboy (217) | ||
| 319554 | 2005-01-31 00:44:00 | Just ask someone at Dick Smith (www.dse.co.nz) or Jaycar (www1.jaycar.co.nz) | Rob99 (151) | ||
| 319555 | 2005-01-31 00:45:00 | The diameter of the plastic on the DSE 2.5mm plugs is 8mm. It would be possible to skim down to 7.5mm. The wall thickness would be a bit on the light side, but still adequate, alternatively replace the plastic body with heatshrink tube, | Terry Porritt (14) | ||
| 1 | |||||