Forum Home
Press F1
 
Thread ID: 53883 2005-01-30 05:37:00 Building a new PC. Tribomb (5547) Press F1
Post ID Timestamp Content User
319374 2005-01-30 05:37:00 I have some questions about my PC that I am building. I have succsefully installed the motherboard, and all the components. I have got the floppy and the CD ROM drives in. The only problem is that the case has only two spaces for the floppy and the HDD. I have been told that you need to keep alot of distance between the HDD and anything else as it can get really hot. What can I do?

Also I have front USB, microphone and speakers. For that I have alot of one pin connectors to put on the motherboard. One set is for USB 1.1 and another is USB 2.0. I will use the USB 2.0 set. It has on it, USB 2.0, GND and VCC on them. Where shall I put them? There is a L Speaker and a R speaker, Mic Data and Mic GND. I also dont know where to put them.

Any help would be greatly appreciated.

:badpc:
Tribomb (5547)
319375 2005-01-30 05:43:00 To prevent your HDD from getting too hot you could install a fan in the front of your case to direct cold air over it. Sb0h (3744)
319376 2005-01-30 05:49:00 just put it where it fits, basicly :p just make sure you have engouh cold air flow, some fans pushing air in and fans pushing the air out.

check your manual for those pins
Prescott (11)
319377 2005-01-30 05:54:00 I wouldnt worry about the hdd and the floppy disk.. You cant put the floppy anywhere else. It'll be too wide unless u get a bracket for it to fit in a 5 1/4 bay like where a cd/dvd goes.

The USB cable coming from the front of the case are red, white, green, black, and black on the wire that has 5 wires on it.

Forget one of these black wires... on the cable with 5 wires.. it does nothing.

The other wires (4 wires are the same red,white,green,black). Put them in this order on the 4 and 5 pin pin connection on the motherboard. One under the other.

Also, if u have XP u need to install SP1 for USB 2 to work properly. And also the ide inf drivers from the motherboard cd. I know nothing about the mic connection. This case doesnt have a connection for a mic or speakers on the front.
Speedy Gonzales (78)
319378 2005-01-30 05:58:00 what motherboard do you have tribomb? Prescott (11)
319379 2005-01-30 06:04:00 I have the Asus AV8 Delux Tribomb (5547)
319380 2005-01-30 06:07:00 Will it be alright? I have got a Western Digital HDD. Can I put it in there anyway? Tribomb (5547)
319381 2005-01-30 06:13:00 Well if its the only hdd u have you have no choice. You have to, to install windows on it.

Put it in a spare slot if theres one in the case.

NOT where the floppy goes, it wont fit there most probably.
Speedy Gonzales (78)
319382 2005-01-30 06:27:00 You have a case with one HHD bay! What brand and model is it? If htere's only one bay, put it in there, don't worry about heat at this stage (I have 3 HDD's, floppy and DVD with no special cooling and no heat issues).

There should also be an instruction booklet or sheet for the case USB and SPIDF connections which you'll have to match up with the motherboards pins a la the manual.
Murray P (44)
319383 2005-01-30 06:45:00 if it does need better cooling you can get 3"bay to 5" bay adaptors so the hardrive can be installed by the cd/dvd drive. tweak'e (69)
1 2