| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 54001 | 2005-02-01 21:53:00 | PCI messages in Device Manager | straka01 (310) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 320531 | 2005-02-01 21:53:00 | I've just loaded win98se onto a PC that the previous HDD died in. All has gone well except that I have 4x PCI Devices with yellow marks - I presume these refer to PCI cards? 1] Does this mean that win98 couldn't load drivers for these devices? 2] Do I need to get drivers from the net and install them to clear these yellow marks and make all the 'PCI cards' work properly? 3] I've loaded the HP 17" Monitor driver this way but I still can't change the screen settings from the defaults - i.e. everything is large onscreen... What else is needed to fix this? The monitor works correctly with this MB as I had another HDD attached beforehand and all was fine. Any suggestions welcome. |
straka01 (310) | ||
| 320532 | 2005-02-01 21:58:00 | you need to install ALL drivers for your pc starting with the motherboard drivers. | tweak'e (69) | ||
| 320533 | 2005-02-01 22:25:00 | Are the MB details in System Information? | straka01 (310) | ||
| 320534 | 2005-02-01 23:21:00 | No . You should have a CD that came with the computer on which the motherboard drivers, etc will be for you to install . |
FoxyMX (5) | ||
| 320535 | 2005-02-01 23:27:00 | That's the problem. There are no CDs for this at all. None came with the PC. What now? |
straka01 (310) | ||
| 320536 | 2005-02-01 23:44:00 | See the reply in your other thread. | FoxyMX (5) | ||
| 1 | |||||