| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 54154 | 2005-02-05 05:17:00 | 2 Q's about my cpu + ram in new mobo | Rpg_pro (5689) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 321735 | 2005-02-05 05:17:00 | Hello guys, Today i brought a new motherboard "a7nx8" socket a now i have installed my 2200+ in but when i boot up it says its only a 1800+, the jumper is set to 266/333/400 but its still running at 200 fsb? should i manuly increase the fsb in the bios or should it of done it automaticly? Secondly Does it matter what slots i stick my ram in to run at dual channel? (3 slots) i have stuck one in slot 1 and 2 and its saying at boot up its running at 100mhz and single channel. Thanks |
Rpg_pro (5689) | ||
| 321736 | 2005-02-05 05:29:00 | Ok im running at dual channel mode now, im still wondering if i should change the fsb in the bios to make my cpu back to normal :@@: | Rpg_pro (5689) | ||
| 321737 | 2005-02-05 05:44:00 | Are the ram simms the same brand and speed. Look in the manual on how to make it dual channel. It might be slot 1 and 3. If the slots are coloured like purple/blue put the simms in those slots. Its not running in dual channel if it says single channel. |
Speedy Gonzales (78) | ||
| 321738 | 2005-02-05 06:36:00 | well if it is actually an Asus a7n8x asus cpu support (www.asus.com.tw) Probably needs a bios update to detect the speed automatically. You really need to read the motherboard manual to find out. |
gibler (49) | ||
| 1 | |||||