Forum Home
Press F1
 
Thread ID: 137478 2014-07-13 05:54:00 No post issue. Driftwood (5551) Press F1
Post ID Timestamp Content User
1379131 2014-07-13 05:54:00 Bit of a problem with my new flight sim system.

Sliverstone Strider St60F-ES
Asus P8 Z77-V
i7 3770K
Zalman CNPS 10X Performa
G.Skill F3-12800CL9D-8GBXL
EVGA GTX660 ti
Samsung SSD 840EVO 250GB
Seagate ST500DM002 Sata3
Win 7 x64 HP

Been running perfect for last couple of months overclocked to 4.2MHz
Usually leave it in sleep mode but shut it down yesterday.
Pushed the go button today & it wouldn't post.
Fans all ran but no beep.
Could see 2 red lights showing.
When I opened it up they turned out to be the VGA & Boot.
Everything looked neat & tidy inside so I checked the connections & reseated the memory etc as you do.
Of coarse then it went perfectly after that.
Bit frightened to turn it off now.
Driftwood (5551)
1379132 2014-07-13 06:27:00 Set it back to its defaults. See if it boots. Check the power to the card if it needs power. And the SATA cable to the hdd. If that doesnt work remove the card and see if onboard video works Speedy Gonzales (78)
1379133 2014-07-14 00:05:00 Thanks Speedy.

System is all go again atm.

Have removed the overclock, mostly to exclude that from the possibilities.
This also cured the problem I was having here:

pressf1.pcworld.co.nz

Guess I'll have to wait & see if the problem returns.
Driftwood (5551)
1