| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 54789 | 2005-02-22 07:13:00 | Dynalink RTA770 | bk T (215) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 327387 | 2005-02-22 10:06:00 | Have you tried a reset. There should be a reset button on the back panel. Big enough fo a ball point pen to push and hold normally for 5 - 10sec and this will reset it back to factory defualt settings. Re-enter your info and try again. Will a reset void the warranty? |
bk T (215) | ||
| 327388 | 2005-02-22 22:31:00 | Will a reset void the warranty? No. It's what Dynalink will tell you to do anyway. |
berryb (99) | ||
| 327389 | 2005-02-22 23:41:00 | Just got this RTA 770 4 port router but could not get it connected to the Internet. No problem in entering the web configuring page (192.168.1.1) with 'admin' as the username and password. Computer's tcp/ip settings are: 192.168.1.10 subnet : 255.255.255.0 Default Gateway: 192.168.1.1 Preferred DNS : 202.27.184.3 Alternate DNS : 202.27.184.5 Also have tried using the obtain ip address automatically with the same results. Keyed in the username: xxx.xadsl@xtra.co.nz and the xxxxx password; clicked 'connect' when it says 'ready to connect' but was not successfull. Have tried many attempts with the same result. All computer settings seems to be in order, or else won't be able to enter the configuring page, right? Also, able to ping the router without problem. Rang the 0800 number for technical support and as usual, left message and still waiting for their reply. Just bought this router from BP Tech this morning, do you think that I should request for a replacement? Cheers Check to make sure that the modem is connecting to the DSLAM. To do this go to Status tab at top, then to ADSL Line, Line State, and let us know what it says. If that says Show time, check Status, Internet Connection and see what it says next to Status. Finally under quick start, it should say "Your Router is ........." |
Dragonslayer (512) | ||
| 1 2 | |||||