| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 55128 | 2005-03-03 12:44:00 | A linux distro for the Forgotten Middle-man - Seeking Users for Chills Distro! | Chilling_Silence (9) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 330217 | 2005-03-04 05:38:00 | I still get the "torrent unauthrosied" Chill, so I'll await developments. Anyone want to comment on this from the Azureus configuration wizard while attempting to test a port: Testing port 6881....... Unable to test because listening port is already in use. Please stop all active torrents and restart Azureus. Then run this test again. Well I've stopped all 1 torrents, in fact after a couple of goes I removed it (sorry Chill), but the message still comes up. I've pinholed/mapped/ forwarded ports in the following manner on my Dynalink RTA210: Protocol: TCP. External Packet -: ATM PVC Name: ppp_Device. Port: 6969. Internal Packet -: IP Address 192.XXX.XX.XX Port: 6881. I've done the same for UDP, is this ok? Edit: UPnP::SSDP: ignoring loopback address /127.0.0.1 UPnP::SSDP: group = /239.255.255.250:0/eth0:Realtek RTL8139/810x Family Fast Ethernet NIC -/192.168.1.2 Mapping request: UDP tracker client port (UDP/6881), enabled = true Mapping request: Incoming Peer Data Port (TCP/6881), enabled = true Mapping request: TCP Tracker Port (TCP/6969), enabled = false Mapping request: TCP SSL Tracker Port (TCP/7000), enabled = false Mapping request: UDP Tracker Port (UDP/6969), enabled = false UPnP: reset I'll change that to port 6881 on TCP what about UDP? |
Murray P (44) | ||
| 330218 | 2005-03-04 05:40:00 | You only need 6881 on TCP It says 9 announces, so its getting through.... 1 scrapes....? Chill. |
Chilling_Silence (9) | ||
| 330219 | 2005-03-04 05:48:00 | Still getting unauthorised here :-S | ninja (1671) | ||
| 330220 | 2005-03-04 05:49:00 | I get the same. Unathorised. |
Metla (12) | ||
| 330221 | 2005-03-04 05:51:00 | You only need 6881 on TCP It says 9 announces, so its getting through.... 1 scrapes....?Azureus opened up (compliments of UPnP) both TCP and UDP so I figure it needs both? Chill, check out my IP and see if your client is logging my attempts. |
Jen (38) | ||
| 330222 | 2005-03-04 05:57:00 | Azureus opened up (compliments of UPnP) both TCP and UDP so I figure it needs both? Chill, check out my IP and see if your client is logging my attempts. I've changed both TCP and UDP to port 6881 for external and internal packets, is that correct? Sigh still no go, and still getting "torrent unauthorised". Haven't the nouse to figure out which one is doing what to me. |
Murray P (44) | ||
| 330223 | 2005-03-04 06:05:00 | torrent not working for me either with btgui | Sam I Am (1679) | ||
| 330224 | 2005-03-04 06:08:00 | OK, I have action here now! :D Well, it is mainly I have just been presented with a authentication dialog box for the torrent. It wants username and password. You want to PM/IM/email me that if it isn't to be public? Murray> I only have external packets configure, don't even get the opportunity to fiddle with internal packets |
Jen (38) | ||
| 330225 | 2005-03-04 06:09:00 | Yeah Murray, you look fine there :) Id say its me at fault.. Okay, I'll try adding a username/password - Rehashing it now, and it'll be using port 6969, and authenticated: username= linux password = linux1 lets see how we go - Just finishing rehashing.. I'll post the new torrent in a min. Wish me luck! |
Chilling_Silence (9) | ||
| 330226 | 2005-03-04 06:14:00 | W00t! got the p/word dialogue. Progress Chilli Boy :) hurray up, all this fiddling has got the old anticipatory juices flowing............ | Murray P (44) | ||
| 1 2 3 4 5 6 7 8 9 10 11 | |||||