Forum Home
Press F1
 
Thread ID: 55403 2005-03-09 23:05:00 HL2 map compile overheats my CPU Biggles (121) Press F1
Post ID Timestamp Content User
332437 2005-03-09 23:05:00 Since I ditched my cruddy old case in favour of a Li-an Li VC1000 a while back, I've had no overheating problems, even during the hotest days. But now that I'm compiling CS:S maps I've got a new heat issue. CPU (P4 2.6GHz) heat rises rapidly to about 68 degrees during the final (RAD) process in my map compile. And this is regardless of ambient room temp (happens at night).

Must be some serious number crunching going on there. Since it appears this is directly related to the CPU working - and not related to any video card or hard drive generated heat - it looks like I might need to investiagte some better CPU cooling options to replace the standard Intel heatsink/fan combo that on there at the moment.

Anyone got any recommended CPU/fan combos for a P4 2.6GHz?
Biggles (121)
332438 2005-03-09 23:55:00 Ive always been a fan of the Volcano series of fans :D

Not too expensive either, I picked up a Volcano9 about 6 months back for only $40ish

What happens if you do some benchmarking and max out the CPU a bit, what happens to the temp then?
Chilling_Silence (9)
332439 2005-03-10 00:07:00 Go AMD. Feel the love. ninja (1671)
332440 2005-03-10 00:13:00 Go AMD. Feel the love

I wouldn't mind trying except ...... $$$$$$$$$ ........ major upgrades are not an option right now, and when an upgrade does poke over the budget horizon, it will likely be the vid card.
Biggles (121)
332441 2005-03-10 00:21:00 Hi Bruce - assuming you have a Prescott Socket 478 CPU there?

I've heard great things about the Zalman CNPS7000 (www.endpcnoise.com) as a cooler.

Lo.
Lohsing (219)
332442 2005-03-10 00:27:00 What happens if you do some benchmarking and max out the CPU a bit, what happens to the temp then?

Haven't tried. Might take 3DMark home and give it a go. There's no video load involved in this - map compiling is running in a command box and no other apps are running at the time.
Biggles (121)
332443 2005-03-10 00:37:00 Once you have established for sure that it's the software load on the CPU rising your temperature, have a wander around here (www.silentpcreview.com) to get the lowdown on whats hot & whats not, without driving the rest of the household barmy while your compiling. Murray P (44)
332444 2005-03-10 00:51:00 What is the CPU fan speed at the time? The stock fan is temp controlled, perhaps it takes too long to ramp up the speed. PaulD (232)
332445 2005-03-10 00:54:00 Yes, but the benchmarking should also put pressure on your CPU, unless you feel like booting the INSERT Linux LiveCD and running "stress" which will load your CPU Chilling_Silence (9)
332446 2005-03-10 00:58:00 There's always the SiSoft Sandra "burn in" function...

Lo.
Lohsing (219)
1 2 3