| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 55796 | 2005-03-19 22:40:00 | Chassis fan problems | Stubbz_nzl (7645) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 335920 | 2005-03-19 22:40:00 | hey all, Got me a strange problem.. after buying myself a new case i decided to move my computer into it (as one would) didn't change or touch anything, but when i connected up the chassis fan to the motherboard it wouldn't start up with the computer... the cpu fan still runs fine but ive tried both the power fan connector and the chassis fan connector. i have an Asus A7V600 motherboard. any ideas what may have caused this?? |
Stubbz_nzl (7645) | ||
| 335921 | 2005-03-19 23:28:00 | the termal sensors on the M/B maybe saying the operation of this fan is not needed, you can over-ride this in the BIOS by setting the slowest speed setting to always on or slow. The operation of these fans are often controlled the Mother Board and the termal conditions that exsist within the case, high temp Aux fans come on, normal operating temp range aux fans are not used. |
beama (111) | ||
| 335922 | 2005-03-20 05:28:00 | Connect it to the PSU rather than the MB. You will need one of those adapters. | pctek (84) | ||
| 1 | |||||