| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 55994 | 2005-03-24 10:11:00 | pcu running half speed | hornbeam (7691) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 337599 | 2005-03-24 10:11:00 | P111 E 1Ghz coppermine on asus cusl2-c mb now this seems to be running at 500mhz, as reported in bios and by other software (sisoftsandra) If I try to change the settings in bios it wont let me...only works on 500 hundred setting. The pcu is reported as having a range of 500 - 1300mhz. But it will only run at 500 which is giving big probs with CAD apps I have updated the bios. Now Totally lost...... |
hornbeam (7691) | ||
| 337600 | 2005-03-24 10:16:00 | Try resetting the BIOS default settings. Then reconfigure what needs to be configured. Then save the BIOS settings. Then reboot... You didnt change any jumpers on the mobo did u?? |
Speedy Gonzales (78) | ||
| 337601 | 2005-03-24 10:49:00 | is this a laptop? if so it maybe a power saving thing... | robsonde (120) | ||
| 337602 | 2005-03-24 15:06:00 | I've reset bios etc, it wont allow me to change the speed. when I save settings & exit it goes back to bios telling me the settings are incorrect. The setting should be 1000mhz but it will only work on 500. It's a desktop |
hornbeam (7691) | ||
| 1 | |||||