| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 56370 | 2005-04-03 05:25:00 | Overclocking | notechyet (4479) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 341037 | 2005-04-03 05:25:00 | Hello all I am somewhat a beginner in this field but an intermediate to advance over the whole- I would like to overclock my pc Mainboard: Albatron Corp 82865G/PE/P Chipset Inteli848/i865 Settings Ram 133Mhz(ddr266) /CAS:2,5-3-3-6/single channel Kann anyone help me on that? Thanks Gion |
notechyet (4479) | ||
| 341038 | 2005-04-03 06:19:00 | Hi Gion, If you are after information you should have a look at Atomic's FAQ (www.atomicmpc.com.au) and also have a look at whetu's article (forums.overclockers.co.nz) on Overclockers. Both of these spots should give you some ideas about what to do. :) HTH |
Simply_Si (354) | ||
| 341039 | 2005-04-03 07:17:00 | before overclocking you must know the concequences (spelling) of it, a few false moves and bye bye expensive hardware. remember the higher the oc the hotter your pc gear gets..... research a little before overclocking, that would be my main advice. and also the best way to overclock is in the BIOS, hopefully your BIOS can overclock your pc. my parents BIOS on their pc doesnt seem too. |
Prescott (11) | ||
| 341040 | 2005-04-03 21:05:00 | Good morning Thanks to both of you and specially for the links. I had a short read and it looks as the disadvantages are to risky for what I would get out of it. At the end it is my work tool and quite a lot at risk. I may querry how much the change of the file page influenzes the work capability? Once more thanks! Gion |
notechyet (4479) | ||
| 341041 | 2005-04-04 04:35:00 | For the definitive (exhaustive read) guide on paging, read this: rojakpot.com |
whetu (237) | ||
| 1 | |||||